Short, handmade detachable wearable nails are widely loved for their convenience and aesthetics, but improper removal can easily damage the nails or surrounding skin. To avoid such problems, it's crucial to comprehensively control five aspects: tool preparation, softening process, technique, residue removal, and aftercare, ensuring a gentle and safe removal process.
Before removing short, handmade detachable wearable nails, prepare professional tools and avoid using hard metal objects to pry them open. Wooden sticks, silicone pushers, or plastic nail files are recommended; these tools are soft and reduce friction damage to the nails. Also, prepare nail polish remover, glue remover, olive oil or alcohol swabs to soften the glue; cotton pads or aluminum foil can help wrap the nail to improve softening efficiency; warm water and mild soap are used for subsequent cleaning. Tools should be chosen based on the principle of "not damaging the nail surface," avoiding sharp or rough objects.
Softening the glue is a crucial step in removal. You can soak your fingers in warm water for about 5-10 minutes to soften the glue with heat; or soak cotton pads in nail polish remover or alcohol and apply them to the edges of the nail tips, waiting 3-5 minutes to allow the glue to break down. If the nail tips are tightly adhered, you can wrap cotton pads with aluminum foil to create a sealed environment and accelerate glue dissolution. Olive oil can also reduce resistance when tearing by acting as a lubricant. Be patient during the softening process and avoid forcibly removing the nail if the glue is not fully softened.
The technique should follow the principle of "from edge to whole". After the glue has softened, gently insert the flat end of an orange peel stick into the gap between the nail tip and the nail, and slowly loosen it along the edge of the nail tip. Do not pry it directly from the middle to avoid uneven pressure and delamination. If the nail tip and nail are tightly adhered, you can apply a small amount of glue remover to the gap and wait for the glue to soften further before continuing. Keep your fingers steady during removal to avoid violent friction between the nail and nail tip due to shaking. After the nail tip comes off, glue or debris may remain on the nail surface. Clean it gently. Use a cotton pad dampened with a small amount of alcohol or olive oil to gently wipe the nail surface to remove residue. If the glue is stubborn, use a plastic nail file at a 45-degree angle to gently scrape it, avoiding scratching the nail with a metal file. Control the pressure during cleaning, ensuring the nail surface is not damaged, and avoid repeatedly rubbing the same area.
The removed nail is fragile and needs timely care to restore its health. Wash your hands with warm water and mild soap to remove residual chemicals; then apply a nail oil containing vitamin E, keratin, or plant extracts to nourish and strengthen the nail. Regularly massage the skin around the nails with nail oil to promote blood circulation and prevent hangnails. If the nail splits or breaks, discontinue use of the short handmade detachable wearable nails until the nail has fully recovered before resuming decoration.
The removal of short handmade detachable wearable nails should balance efficiency and gentleness. By choosing the right tools, fully softening the glue, using proper techniques, carefully cleaning up any residue, and promptly caring for your nails, you can minimize the risk of damage. If you encounter situations where the nail tip is too tightly adhered to your nail or the glue is difficult to soften during removal, do not force it. Seek help from a professional nail technician to avoid damaging your nails due to improper handling.
