Jelly glue wear nails, with their lightweight, translucent texture and flexible, convenient application, have become a popular choice for modern jelly glue wear nails. The teardrop shape, as a classic design, directly determines the overall visual sophistication due to its symmetry. From nail preparation to detail finishing, every step requires precise control to create a natural and smooth teardrop outline.
Nail preparation is the foundation for creating a symmetrical teardrop. First, use a fine-grit nail file to buff the nail surface in one direction to avoid unevenness caused by back-and-forth friction. Focus buffing on the edges of the nail surface to create a soft curve, providing a smooth base for subsequent glue application. After buffing, thoroughly clean the nail surface with alcohol wipes to remove oil and debris, paying particular attention to wiping the cuticle area at the base of the nail. If there are significant differences in the curvature of the nail surface, adjust the buffing pressure locally to achieve a smoother overall surface and ensure even coverage of the jelly glue.
The cutting and positioning of the jelly glue directly affects the presentation of the teardrop shape. Choose a gel nail that is 1mm narrower than your natural nail width. This avoids exposed edges while allowing for adjustments. When placing the gel on the nail surface, ensure its center line aligns with the nail's central axis, leaving a 1-2mm gap at the top and bottom edges to prevent deformation due to pressure after application. Tweezers can be used to assist in positioning, ensuring the gel is centered on the nail surface. If the gel's curvature doesn't match your natural nail, opt for a flatter, curved gel, as it better fits flatter nails and reduces the risk of gaps.
Angle control during application is crucial for creating the teardrop shape. Tilt the gel at a 45-degree angle, starting 2mm from the back edge of the nail root, slowly push forward to the back edge, then press down. This action should be performed in one smooth motion to ensure the gel evenly covers the nail surface and creates a natural teardrop shape. Apply even pressure with your fingertips, pushing from the center outwards to remove any air bubbles. If the teardrop's height is uneven, gently lift the gel to adjust the angle and press again until symmetrical. For beginners, practice the dropper technique on paper first to master the application of glue, then apply it to actual jelly glue wear nails.
Eliminating air bubbles and sealing the edges are key to ensuring the teardrop shape lasts. After applying the glue, use a wooden stick to create a small slit from the center to the edge to remove any remaining air bubbles. When removing the protective film, press the glue downwards to ensure it adheres completely to the nail surface before slowly peeling it off, avoiding movement of the film along with the glue. Gently press the edges with a wooden stick to ensure a seamless connection between the glue and the nail surface, preventing later lifting and teardrop deformation. If using solid glue for reinforcement, control the amount of glue evenly to avoid localized buildup that could affect the teardrop shape.
Detailed finishing touches can further enhance the teardrop's refinement. After the basic application, observe whether the curves on both sides of the teardrop are natural and smooth. If there is slight asymmetry, trim the edges of the glue with small scissors or gently buff with a sander. For jelly glue wear nail artists aiming for the ultimate effect, tiny glitter or pearls can be added to the edges of the teardrop to enhance symmetry through light and shadow effects. If the tip of the droplet forks, gently pry the gel with a needle to reunite it, creating a sharp finish.
Post-curing inspection and adjustments are essential. After curing the jelly glue with a UV or LED lamp, observe the droplet shape from multiple angles. Check for symmetry on both sides and a rounded, full tip under natural light. If deviations are found, soften the gel with a warm towel and make minor adjustments to ensure the final effect meets expectations. For droplet shapes with larger curvatures, increase the curing time to enhance gel hardness and prevent deformation during daily use.
Daily maintenance prolongs the perfect droplet shape. Avoid prolonged soaking in hot water or contact with chemical solvents to prevent softening and deformation. When removing, soak the nail in warm water and gently pry it open from the edge with a special wooden stick. Do not forcibly tear it, as this may damage the nail surface. Proper maintenance will ensure the symmetrical beauty of the jelly glue wear nail droplet remains as good as new, adding a dynamic touch to the overall design.
